General specifications | |
---|---|
Switching function | Normally closed (NC) |
Output type | NAMUR |
Rated operating distance | 4 mm |
Installation | flush |
Assured operating distance | 0 ... 3.04 mm |
Reduction factor rAl | 0.15 |
Reduction factor rCu | 0.05 |
Reduction factor r304 | 0.55 |
Output type | 2-wire |
Nominal ratings | |
Nominal voltage | 8 V |
Switching frequency | 0 ... 1000 Hz |
Hysteresis | ? 20 % at 200°C |
Suitable for 2:1 technology | yes , Reverse polarity protection diode not required |
Current consumption | |
Compliance with standards and directives | |
Standard conformity | |
Approvals and certificates | |
UL approval | cULus Listed, General Purpose |
CCC approval | CCC approval / marking not required for products rated ?36 V |
Ambient conditions | |
Ambient temperature | 0 ... 200 °C (32 ... 392 °F) |
Mechanical specifications | |
Connection type | cable SIHF , 10 m |
Core cross-section | 0.34 mm2 |
Housing material | Stainless steel 1.4305 / AISI 303 |
Sensing face | PPS |
Degree of protection | IP65 |
Cable | |
Note | amplifier -25°C...70°C 2 m PTFE cable between amplifier and oscillator |
Data for application in connection with hazardous areas | |
Equipment protection level | Ga , Gb , Da |
General information | |
Use in the hazardous area | see instruction manuals |
8 (029) 555-8-000 | |
8 (044) 555-8-000 | |
8 (017) 255-8-000 |